1020 Servo screw hot plate welder
- Model numberHW-1020SA
- Overall dimension of equipment1600,1700,2630
- Weight3T
- Template size1020,380
- Llongest welding piece750
- Height of front door opening1000
- Max distance of moving plate1200
- Stroke of upper moving plate500
- Lower moving plate stroke500
- Hot travel500
- Temperature control areas12
- The direction of the mouldFrom the rear of the equipment
- The power supply3 phase AC380V 50 hz
- Air supply0.5-0.6MPa
HWH-1020 hot plate machine is mainly composed of chassis, upper and lower mold assembly, advance and retreat hot mold assembly, mold assembly, lifting door assembly, pneumatic components and electrical components. The bottom frame is assembled by channel steel. The bottom plate sits horizontally on the plane of the bottom frame and is supported by four guide columns.The top plate moves up and down. The template is driven by a large cylinder to open and close, up and down, and the upper and lower fixtures are driven at the same time. The hot mold cylinder pushes the hot mold moving on the guide rail. Electrical control adopts programmable PLC and man-machine interface operation panel, etc., which realizes the automation control and humanized design of the machine.
Main technical parameters
Machine model: HWH-1020
Working Table area: L1020 x W380
Dimensions: L1550 x W1420 x H2900
Total weight (KG) : about 3000KG
Power (KW) : 45KW
Operating voltage: 3-phase AC380V 50Hz
Air source: 0.6~ 0.8Mpa
Welding principle
The hot plate plastic welding machine uses an electric heating hot plate to melt the welding parts of the upper and lower work pieces respectively, and then press the upper and lower plastic parts together, and melt the upper and lower plastic parts together after curing.
Transmission mechanism
The HWH-1020 machine adopts man-machine interface and PLC control, and performs all actions through pneumatic components. After the air source passes through the air source triples on the top of the machine, it directly enters the air storage tank on the top of the machine, and then is distributed to the pneumatic components by the air storage tank.
Functional description
- The three-axis is driven by cylinder, and the hot plate is driven by the back swing arm.
2.PLC, HMI (7 inches) using Mitsubishi brand
- Pneumatic parts mainly adopt SMC brand. The brand of electrical plug is Winsten.
- Fast loading and unloading mold at the back end of the equipment. The top is equipped with air storage tank.
- Mold clamping cylinder control air circuit: 2 routes of the upper mold, 3 routes of the lower mold ; Vacuum circuit : 2 routes of upper mould, using vacuum pump.
6, the middle mold reserved heat extraction function, with a vacuum generator.
7, the upper and lower mold air plug automatic quick connection, with mold identification function (8 groups)
8, 12 sets of temperature control, temperature control module PID control (up and down a total of 12 sets), each group of
heating pipe equipped with current monitoring.
Application
It’s suitable for hot plate welding of two plastic parts (especially for car lights).The longest welding product is about 600mm